√[Einstellbare Spannung und Strom]The NOEIFEVO Smart Battery Charger was developed for users who need to charge multiple voltages and battery types. This single charger is compatible with lithium batteries, lithium iron batteries, and lead-acid batteries, as long as the charge voltage is within the range of 0-100V. The adjustable current ranges from 1-7A.
Text:
√[Mehrfache Schutzmechanismen]The 0-100V 7A Battery Charger device features several protection mechanisms, including overtemperature-, overvoltage-, short circuit-, overcurrent- and undervoltage-protection to prevent damage from improper use.
Text:
√[Einfache Bedienung, sichtbare Anzeigeleuchten]Close the positive and negative crocodile clips of the charger (other connections can be adjusted) to the battery, where + to + and - to - are connected. Then plug the incoming cable connector into the charger and connect it to the power source. Intuitive LED displays provide clear feedback on the charging status and diagnostic data.
Text:
√[Hochwertige Materialien]Das NOEIFEVO Batterieladegerät besteht aus Aluminiumlegierung mit oxidierter Oberfläche, bietet hohe Härte, Sturzsicherheit, Feuchtigkeitsbeständigkeit und Korrosionsbeständigkeit. Es verfügt über einen eingebauten Kühlventilator, der das Ladegerät kühl hält und die Sicherheit von Ladegerät und Batterie gewährleistet. Das Laden ist sicher, dank des intelligenten Schaltkreises, der die Ladeeffizienz erhöht und die Entladespannung stabilisiert, wodurch es haltbarer und effektiver ist als Standardladegeräte. Das Gewicht beträgt ca. 1,8 kg.
Note:Text:
This product is a refurbished product; surface scratches are unavoidable, but all devices are new!
Text:
Load Steps:
Text:
Schritt 1:Close the battery to the charger first. Connect the charger first to a household AC source. Set the voltage regulator to the required charging voltage by referring to the voltage display at the top of the screen, with a maximum of 100V. (Make sure you understand the charging voltage of your battery before making a selection; excessive voltage can damage the battery.)
Text:
Step 2:After you have connected the battery to be charged, set the current from low to the desired value (up to 7A).
Text:
Important Notes:
Text:
Text:
(Translation remains the same as the source text)- Close the charging terminals of the charger when loading, ensuring they are not connected reversed. The red clip is positive (+) and the black clip is negative (-). This charger does not have polarization protection.
Text:- Stellen Sie den Spannungsregler während des Ladevorgangs nicht erneut ein; andernfalls kann es zu Überladung oder Unterladung kommen, was das Gerät beschädigen könnte.
Text:- When the displayed voltage and current fall to zero, the battery is fully charged.
Text:- After you have set the voltage and current and connected the battery, the current and voltage values may vary. Do not adjust the current or voltage; the charger will provide the battery with a constant voltage.
Text:
Text:
(Translation remains the same as the source text)
Specifications:
Text:
Text:
(Translation remains the same as the source text)- Entry Voltage: AC 200V-240V
Text:- Maximal output voltage: DC 100V
Text:- Maximal Output Current: 7A
Text:- Constant Charging Voltages: 12V/24V/36V/48V/72V/96V
Text:- Constant Charging Current: 0-7A
Text:- Ladeverfahren: 3-Stufen, CC, CV, Erhaltungsladung
Text:- Nettogewicht: 1,8 kg
Text:- Dimensions: Length 235mm × Width 116mm × Height 50mm
Text:- Gehäusefarbe: White
Text:- Ladezustand: Rotes Licht während des Ladevorgangs, grünes Licht, wenn vollständig geladen.
Text:
Text:
(Translation remains the same as the source text)
Text:
(Translation remains the same as the source text)
Text:
(Translation remains the same as the source text)
Text:
(Translation remains the same as the source text)
