Specifications:

(1) A 24V charger can only be connected to 24V batteries (operating voltage range: 19.5V~28V).

(2) When using the charger, the power of the electrical device must not exceed the rated power of the charger.

Output frequency: 50 Hz

Input voltage: Optional 24V

Output voltage: 220V

Output voltage waveform: pure sine wave

Type: pure sine wave inverter

Socket: Universal type

Model: 3000 W power

Peak power: 3000 W

Wave form: pure sine wave

Continuous power: 1500 W

Packaging size : 27 x 13.5 x 7 cm

Gross weight of the product: 1.82 kg

Model: 4000 W Power

Peak power: 4000 W

Wave form: pure sine wave

Continuous power: 2000 W

Packaging size : 27 x 17 x 8 cm

Product weight: 2.5 kg

Model: 5000 W Power

Peak power: 5000 W

Wave form: pure sine wave

Continuous power: 2500 W

Packaging size :: 31 x 17 x 8 cm

Net weight of the product: 3.1 kg

Model: 6000 W Power

Peak power: 6000 W

Wave form: pure sine wave

Continuous power: 3000 W

Packaging size : 36 x 17 x 8 cm

Gross weight of the product: 3.66 kg

Model: 8000 W power

Peak power: 8000 W

Wave form: pure sine wave

Continuous power: 4000 W

Packaging size:42 * 17 * 8 cm

Product weight: 4.3 kg

Note: Manual measurement with slight error.

Be careful:

It cannot be connected to the household outlet.

Before connecting the battery, please distinguish the positive and negative poles of the battery.

3.Minors should not use this product.

Pay attention to waterproofing, moisture protection, impact resistance, and pressure resistance.

When using 24V to connect to the cigarette lighter socket in the vehicle, the power must not exceed 200W (24V truck).

(If powered with 24V and the charger has a voltage below 20V or above 30V, the protective mechanism will be automatically activated and power supply interrupted).

Packaging details:

1 * Battery clip

1 x Thick battery wire

1 x Compliance certification

1 * User manual

1 x Pure sine wave charger

Please choose the phase inverter based on the following information:
1. Inverter parameters:
3000W inverter, continuous operating power is 1500 W, starting power (peak power) is 3000 W.
4000W inverter, continuous operating power is 2000 W, starting power (peak power) is 4000 W.
5000W Inverter, continuous operating power is 2500 W, starting power (peak power) is 5000 W.
6000W Inverter, continuous operating power is 3000 W, starting power (peak power) is 6000 W.
8000W Inverter, continuous operating power is 4000 W, starting power (peak power) is 8000 W.
Select the appropriate inverter based on the starting power (peak power) of your devices.
The required starting power of the device should be lower than the peak power of the inverter to meet usage conditions.
Wenn Sie beispielsweise einen 3000 -W -Wechselrichter erwerben, kann er Geräte mit einer kontinuierlichen Leistung von bis zu 1500 W wie Computern, Fernseher, Fans und Widerstandsgeräten mit Strom versorgen.
Einige induktive Lastgeräte haben jedoch eine Startleistung von 3-12-fachen ihrer kontinuierlichen Leistung. Auch wenn die kontinuierliche Leistungsbedarf erfüllt ist, muss auch die Startleistung erfüllt sein, um das Gerät zu fördern.
Erklären wir mit einem Beispiel:
Wenn Sie einen Noeifevo 12V 100AH -Akku verwenden, können Sie einen 3000 -W -Wechselrichter und eine 500 -W -Stromversorgung verwenden?
1) Stellen Sie zunächst fest, ob die 12 -V -100AH -Batterie die maximale Leistung des Geräts unterstützen kann:The BMS of the 12V 100AH battery is 100A, supporting a continuous discharge current of 100A. This can support a maximum power of 12V * 100A = 1200W, which is greater than 500W.

2) Determine whether the device is resistive or inductive:The power drill is an inductive device. (The determination of whether the device is resistive or inductive should be conducted with your supplier to ensure that the starting power is confirmed.)

3) Verify if the continuous power requirement is met:The continuous power demand of the circuit breaker is 500W and the continuous power of the 3000W converter is 1500W, which is more than 500W.

4) Please verify that the startup power requirement is met:The startup power of the circuit breaker is approximately three times its continuous power rating (varies by brand), at about 1500W. Therefore, a 500-W power supply drill can be used with the Noeifevo 12V 100AH battery and the 3000W inverter.

Note: This method can also be applied to other devices. If you encounter problems or are unsure about operation, you can consult customer service. Thank you!

To select the appropriate battery for the inverter:

Operating time = u (voltage specified) × I (battery capacity) × 0.8 × 0.9 ÷ power

Example: 12 V 100AH battery with a 220 V 100W light bulb

Operating time = 12 V x 100ah x 0.8 x 0.9 ÷ 100W = 7.68 hours

NOTE: 0.8 is the battery discharge coefficient (constant) and 0.9 is the inverter conversion efficiency (constant). This is a rough calculation and should be taken as a reference; actual usage may vary; please rely on actual conditions.