Spezifikationen:
(1) Ein 24V-Wechselrichter kann nur an 24V-Batteries angeschlossen werden (Arbeitsbereich der Voltage: 19,5V~28V).
(2) When using the inverter, the power of the electrical device must not exceed the continuous power of the inverter.
Ausgangsfrequenz: 50 Hz
Input voltage: 24V optional
starting voltage: 220V
Ausgangsspannungswellenform: reine Sinuswelle
Typ: reiner Sinus-Wechselrichter
Sockel: Universaltyp
Model: 3000 W power
Peak power: 3000 W
Wellenform: reine Sinuswelle
Continuous power: 1500 W
package size : 27 x 13,5 x 7 cm
Net weight of the product: 1.82 kg
Model: 4000 W power
Peak power: 4000 W
Wellenform: reine Sinuswelle
Continuous power: 2000 W
package size : 27 x 17 x 8 cm
Net weight of the product: 2.5 kg
Model: 5000 W power
Peak power: 5000 W
Wellenform: reine Sinuswelle
Continuous power: 2500 W
package size :: 31 x 17 x 8 cm
Net weight of the product: 3.1 kg
Model: 6000 W power
Peak power: 6000 W
Wellenform: reine Sinuswelle
Continuous power: 3000 W
package size : 36 x 17 x 8 cm
Net weight of the product: 3.66 kg
Model: 8000 W power
Peak power: 8000 W
Wellenform: reine Sinuswelle
Continuous power: 4000 W
package size:42 * 17 * 8 cm
Net weight of the product: 4.3 kg
Note: Manual measurement with slight error.
Seien Sie vorsichtig :
It cannot be connected to the household electrical outlet.
2. Before you connect the battery, please distinguish the positive and negative poles of the battery.
3. Minors may dies nicht verwenden.
4.Pay attention to water tightness, moisture protection, impact resistance, and pressure resistance.
If 24V is used to connect to the cigarette lighter cable in the vehicle, the power must not exceed 200W (24V LCV).
(If 24V are supplied and the converter has a voltage below 20V or above 30V, the protection mechanism will be activated and power supply interrupted automatically).
Verpackungsdetails :
1 * battery clip
1 x Battery dicker Draht
1 x Compliance certificate
1 * Benutzerhandbuch
1 x Wechselrichter mit reiner Sinuswelle
So choose the voltage converter, please consider the following information:
1. Wechselrichterparameter:
3000W Wechselrichter, kontinuierliche Operating power amounts to 1500 W, Starting power (Peak power) amounts to 3000 W.
4000W Wechselrichter, kontinuierliche Operating power amounts to 2000 W, Starting power (Peak power) 4000W.
5000W Wechselrichter, kontinuierliche Operating power amounts to 2500 W, Starting power (Peak power) amounts to 5000 W.
6000W Wechselrichter, kontinuierliche Operating power amounts to 3000 W, Starting power (Peak power) 6000W.
8000W Wechselrichter, kontinuierliche Operating power amounts to 4000 W, Starting power (Peak power) amounts to 8000 W.
2. Select the appropriate inverter based on the starting power (peak power) of your devices.
The required start-up power of the devices should be lower than the peak power of the inverter to meet the usage conditions.
If you were to acquire a 3000-W converter, it can supply devices with a continuous power of up to 1500 W, such as computers, TVs, fans, and resistive devices.
Some induction loads have, however, a starting power of 3-12 times their continuous power. Even though the continuous power requirement is met, the starting power must also be provided to drive the device.
Let's explain with an example:
If you use a Noeifevo 12V 100AH battery, can you use a 3000-W inverter and a 500-W power supply?
First determine whether the 12-V-100AH battery can support the maximum power of the device:The BMS of the 12-V 100AH battery is 100A, which supports a continuous discharge current of 100A. This can support a maximum power of 12 V * 100A = 1200 W, which is greater than 500 W.
2) Determine whether the device is resistive or inductive:The power drill is an inductive device. (Confirm whether the device is resistive or inductive with your supplier so that starting power can be confirmed.)
3) Check if the continuous power requirement is met:The continuous power of the voltage cutoff is 500 W and the continuous power of the 3000-W inverter is 1500 W, which amounts to more than 500 W.
4) Make sure the starting performance is met:The start-up power of the voltage cut-off is about three times their continuous power (varies with different brands). 1500W. Therefore, the 500-W-power drill can be used with the Noeifevo 12V 100AH battery and the 3000-W-inverter.
Note: This method can also be applied to other devices. If you encounter problems or are unsure about the operation, you can consult customer service. Thanks a lot!
So choose Sie den richtigen Akku for den Wechselrichter aus:
Operating time = u (voltage specified) × I (battery capacity) × 0.8 × 0.9 ÷ current
Example: 12 V 100AH battery with a 220 V 100W bulb
Betriebszeit = 12 V x 100ah x 0,8 x 0,9 ÷ 100W = 7,68 Stunden
NOTE: 0.8 is the battery discharge coefficient (constant) and 0.9 the inverter conversion efficiency (constant). This is a rough calculation and should be taken as a reference. Actual usage may vary; please rely on actual conditions.
